VSAT Activation

1. The system will now perform system check to verify quality of installation. Once this is completed you will receive a status report with an “OK” in the status bar. Then click on continue to finish activation. If it is a brand new modem the system will display an “outdated” text in the software column. Click on continue and the modem will then start to update the software from the network.

2. Once the software update process has started this page would show on the screen. Please do not navigate away from this page. Leave the system for approximately 10 minutes while it is updating.

• The system will automatically divert back to the “Welcome to Self Activation portal” page once the software update has been completed.

3. This time the system should show the Software as being “Updated”. Click on continue.

4. Next you will be required to enter the activation code we have supplied you with. The activation code will look something like this 10162-asiyeuoo (numbers-followed by letters). Once you have entered the activation code click on “Save”.

5. Once this screen is displayed, the activation process is completed.

6. Notice on the bottom of the page a button to reboot. Click on it and leave the modem for about 20minutes to update its Software. The modem will reboot a few times automatically during this period. After 20 minutes the modem will be up and running and your computer will be ready to browse the internet.

NB: If you move the location of the Tooway dish, you will need to repeat the complete installation procedure. If you move more than a couple of kilometers, you may then be in a different beam and will need to reassess which beam is applicable to the new location.